1. Forum
  2. DOVE-Net
  3. Hardware/Software Help

  • output of lsblk

    From Bogomips@VERT to All on Tuesday, May 13, 2025 08:20:49
    NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS
    sda 8:0 0 167.7G 0 disk
    |-sda1 8:1 0 500M 0 part
    |-sda2 8:2 0 128M 0 part
    |-sda3 8:3 0 151.4G 0 part
    |-sda4 8:4 0 1.2G 0 part
    |-sda5 8:5 0 13.5G 0 part
    `-sda6 8:6 0 1.1G 0 part
    sdb 8:16 0 1.8T 0 disk
    `-sdb1 8:17 0 1.8T 0 part
    sdc 8:32 1 57.7G 0 disk
    `-sdc1 8:33 1 57.7G 0 part

    That was what I have.

    Again, the sdb does not show up when I run cfdisk

    Im still trying to output the dmesg to a file so i can read it.

    I'll see if i can find anything in var/log/messages next time.

    I appreciate everyones efforts

    ---
    � Synchronet � Vertrauen � Home of Synchronet � [vert/cvs/bbs].synchro.net
  • From Digital Man@VERT to Bogomips on Tuesday, May 13, 2025 11:51:32
    Re: output of lsblk
    By: Bogomips to All on Tue May 13 2025 08:20 am

    Im still trying to output the dmesg to a file so i can read it.

    'dmesg | less' no?
    --
    digital man (rob)

    Steven Wright quote #32:
    The colder the x-ray table, the more of your body is required to be on it. Norco, CA WX: 64.4�F, 54.0% humidity, 2 mph WNW wind, 0.00 inches rain/24hrs ---
    � Synchronet � Vertrauen � Home of Synchronet � [vert/cvs/bbs].synchro.net
  • From Bogomips@VERT to Digital Man on Tuesday, May 13, 2025 12:39:17
    Re: output of lsblk
    By: Digital Man to Bogomips on Tue May 13 2025 11:51 am

    Im still trying to output the dmesg to a file so i can read it.

    'dmesg | less' no?
    yes also 'dmesg | more'

    thank you, i was trying it backwards as well as trying to grep into a file. Either way, I was able to find the solution to my initial problem. Thanks to help i found here.

    Now I can log in here, switch to a different terminal. try the command and switch back. That's one of the things I love about slack.

    ---
    � Synchronet � Vertrauen � Home of Synchronet � [vert/cvs/bbs].synchro.net
  • From nelgin@VERT/EOTLBBS to All on Tuesday, May 13, 2025 21:22:35
    On Tue, 13 May 2025 12:39:17 -0700
    "Bogomips" (VERT) <VERT![email protected]> wrote:


    Now I can log in here, switch to a different terminal. try the
    command and switch back. That's one of the things I love about slack.

    That's a linux thing, not a slack thing. Actaully, SCO Unix also had
    virtual terminals. I'm sure others did too.
    --
    End Of The Line BBS - Plano, TX
    telnet endofthelinebbs.com 23
    ---
    * Synchronet * End Of The Line BBS - endofthelinebbs.com
  • From Boraxman@VERT/MSRDBBS to Bogomips on Wednesday, May 14, 2025 08:18:00
    Bogomips wrote to All <=-

    @MSGID: <[email protected]>
    NAME MAJ:MIN RM SIZE RO TYPE
    MOUNTPOINTS sda 8:0 0 167.7G 0
    disk |-sda1 8:1 0 500M 0 part
    |-sda2 8:2 0 128M 0 part
    |-sda3 8:3 0 151.4G 0 part
    |-sda4 8:4 0 1.2G 0 part
    |-sda5 8:5 0 13.5G 0 part
    `-sda6 8:6 0 1.1G 0 part
    sdb 8:16 0 1.8T 0 disk
    `-sdb1 8:17 0 1.8T 0 part
    sdc 8:32 1 57.7G 0 disk
    `-sdc1 8:33 1 57.7G 0 part

    That was what I have.

    Again, the sdb does not show up when I run cfdisk

    Im still trying to output the dmesg to a file so i can read it.

    I'll see if i can find anything in var/log/messages next time.

    I appreciate everyones efforts

    The 2TB drive IS there, its /dev/sdb. It has a 1.8TiB partition.

    When you start cfdisk, you need to specify the disk to use as a command line parameter. It defaults to /dev/sda, which is why you are only seeing that disk. Thats all it was!


    Start cfdisk like this

    /sbin/cfdisk /dev/sdb

    or
    sudo /sbin/cfdisk /dev/sdb

    However you start it, ALL you need to do is just add /dev/sdb as a parameter. and you'll be editing /dev/sdb.

    Alternatively, you can try GParted.

    I suspected that it was something like that.

    ... BoraxMan
    --- MultiMail/Linux v0.49
    � Synchronet � MS & RD BBs - bbs.mozysswamp.org